|
Post by account_disabled on Mar 21, 2024 5:10:45 GMT -5
个现行国家法规允许的最大限制: 皇家法令 /(人类消费水的卫生标准) 皇家法令 /(游泳池技术卫生标准) 皇家法令 /(预防和控制军团病) 该参数无非是浊度或浑浊度,其仪器技术是 ISO - 标准第 部分和第 部分(在上述皇家法令中使用)中开发的主题。 在这篇文章中,我们将讨论为什么参数很重要以及相关的仪器技术是什么样的。 浊度的重要性 最近对饮用水皇家法令的修改是由于需要在西班牙立法中采用欧洲法规以及世界卫生组织(WHO)制定的指导标准* 。 具体来说,浊度控制特别重要,因为它与消毒过程的有效性密切相关,无论是化学消毒(氯或其他杀菌剂)还是物理消毒(紫外线辐射)。 这种关系的原因很明显:浊度越大,水中悬浮的颗粒物就越大,这会从两个方面影响它: a) 它增加了这些颗粒滞留在微孔、细菌、病毒和致病性原生动物中的可能性,由于无法物理接触要消除的目标,从而降低了消毒剂的有效性。 除了悬浮液中的“惰性”颗粒之外,这种浊度还可能含有悬浮液中的有机物,其一方面抑制了杀菌效果(通过与有机物反应而损失杀菌剂),另一方面,所述反应会产生对人体健康有害的化合物,例如三卤甲烷和三氯胺(在使用氯作为消毒剂的情况下)。 就防止上述情况或与水相关的设施(反渗透、水池过滤器、工业流程...)恶化/堵塞的水过滤成本而言,还存在经济方面的问题。 同样,我们不想忽略 ISO - 第 部 巴林电报号码数据 分和第 部分“水质:浊度的测定”中对 年 ISO 标准的修改。 在该 ISO 的最新修订中,nm 的红外光源被确定为测量浊度的唯一光源。 它们在第 部分中建立,作为浊度测量的定量方法: 浊度计(° 散射或漫射光测量)用于测量 < 至 =间的浊度(建议用于人类饮用的水的浊度),使用HANNA浊度计,您可以以比率的形式进行测量(通过检测器在 ° 进行补偿)且仅在 ° 时为非比率。 比率模式 查看设备 HI 非比率模式 查看其余设备 浊度计(° 下的透射/衰减光测量)适用于 至 * UAF 之间的浊度(仅对高浊度残留物有效)。 必须考虑到,浊度测量是一种仪器技术,因此需要事先进行重复性和可重复性培训(用硅胶清洁小瓶,标准品和样品进行相同的倒置,避免气泡形成,建立消除气泡的等待时间,避免湿度冷凝……),在HANNA,我们全程陪伴您,从最适合您需求的设备提供建议,到对您的员工进行测量技术培训。 同样重要的是 = 聚合物标准的使用,该标准与福尔马肼一起在 ISO- 本身中进行了解释和研究,与后者相比具有重要优势: 苯乙烯二乙烯基苯颗粒中的聚合物,在悬浮液中稳定,保证结果随时间的重复性。 它不含致癌的硫酸肼,如果存在替代品,应限制和/或消除其使用。
|
|